神州娱乐城

教授，博士生导师。2003年于西南交通大学获得工学博士学位。2005年于同济大学钢结构教研室博士后出站，获同济大学优秀博士后称号。2005年起在神州娱乐城「中国」官方网站工程力学系任教。2010年作为国家公派访问学者在美国里海大学ATLSS研究中心进行合作研究。2016年作为国家公派高级访问学者在瑞士洛桑联邦理工钢结构实验室进行合作研究。培养硕士和博士研究生40余名。

中国仪器仪表学会设备结构健康监测与预警分会总干事，中国钢结构协会钢结构焊接与连接分会理事，中国机械工程学会物流工程分会委员，全国设备结构健康监测标准化技术委员会委员，全国起重机标委会塔机分会、臂架分会委员，江苏省力学学会固体力学专业委员会副主任委员，中国特种设备检验协会团体标准工作委员会起重机械检验标准化工作组委员，美国机械工程师协会（ASME）起重机标准委员会IRG小组成员。

主讲课程：

    计算力学（本科）

    工程力学（本科）

    有限元方法及其应用（研究生）

    疲劳强度与抗疲劳设计（研究生）

    智能建造装备及其开发（研究生）

近年主持的主要科研项目：

国家重点研发计划，高温熔融金属作业事故预防与控制技术研究（子题）

国家自然科学基金项目，基于多尺度随机有限元法的铸钢构件和结构可靠性分析

国家自然科学基金项目，铸钢节点环形对接焊缝的疲劳力学性能研究

江苏省自然科学基金项目，铸钢节点的疲劳力学性能研究

江苏省科技支撑计划项目，基于虚拟样机技术的超大型造船门式起重机数字化平台研发

国家科技支撑计划项目，典型特种设备安全检测技术与仪器设备研发（子题）

交通行业重点实验室开放基金项目，铸钢节点抗疲劳优化设计方法研究

江苏省工程力学分析重点实验室开放基金项目，铸钢节点环形对接焊缝的疲劳损伤分析

国家质检总局科技计划项目，起重机风灾事故防范研究

国家质检总局科技计划项目，起重机金属结构焊缝综合检测评判与寿命估算方法研究

中国高校产学研创新基金（教育部），智能施工机械教学及实践研究

南沿江城际铁路高铁站房大跨度网架施工智能监控及安全预警研究

南沿江城际铁路高铁隧道与路面监测研究

无锡绿地广场智慧工地塔机安全监控系统研究

智慧工厂无人机智能巡检研发平台研究

某物流仓库异形高支模安全监测技术研究

多源动态热辐射下的冶金起重机金属结构性能评估研究

杭州湾跨海大桥工程海中平台改造项目观光塔铸钢节点疲劳分析研究

各类铸钢节点浇铸模拟，数值分析与计算

近年论文代表作：

[1]     Shi F, Jin H*, Xu L, et al. 3D laser scanning-based geometry reconstruction and stress evaluation of a KK-type cast steel node for offshore wind turbine jacket structures. Ocean Engineering, 2026, 363: 126798.

[2]     Shi F, Jin H*. Multi-object droplet tracking for high-frame-rate video analysis in wire-arc welding processes. Expert Systems with Applications, 2026, 313: 131604.

[3]     Zhao L, Jin H*, Wang J. Shear Strength of Wood Linear Friction Welded Joints: Experimental Study and Numerical Analysis. BioResources, 2025, 20(4): 10665-10684.

[4]     Shi F, Jin H*. An inverse method for arc-droplet-pool coupled GMAW simulation based on an iterative current distribution model. International Communications in Heat and Mass Transfer, 2025, 167: 109179.

[5]     Zhang Q, Jin H*. Microstructure evolution and mechanical properties of Cu-Ni functional gradient materials: Molecular dynamics simulation. Materials Today Communications, 2025, 47: 113132.

[6]     Jiao H, Liu J, Xu L, et al. Study on hot spot stress distribution and fatigue life assessment of KK-type cast steel nodes based on scaled model test. Ocean Engineering, 2025, 328: 120990.

[7]     Jiao H, Jin H*. Finite element and experimental analysis of residual stresses in G20Mn5 welded joints considering solid-state phase transformation. International Journal of Pressure Vessels and Piping, 2025, 214: 105422.

[8]     Cheng J, Wang L, Jin H*, et al. Attention-based multi-fidelity deep neural network for efficient estimation of welding residual stresses in V-shaped butt-welded high strength steel plate. Expert Systems with Applications, 2025, 266: 126137.

[9]     Jiao H, Jin H*. Monte Carlo simulation of grain growth in heat-affected zone during welding process of cast steel joint and optimization of welding process. Welding in the World, 2024, 68(10): 2553-2566.

[10]   Cheng J, Jin H*, Qian X. Real-time weld seam feature extraction in construction sites. Automation in Construction, 2024, 160: 105330.

[11]   Jiao H, Jin H*. An automated optimization procedure for geometry parameters calibration of two-curvature conical heat source model. International Journal of Thermal Sciences, 2024, 197: 108788.

[12]   Jiao H, Jin H*. The effect of welding deformation on the equivalent structural stress of dissimilar girth welded joint. International Journal of Pressure Vessels and Piping, 2023, 206: 105081.

[13]   成佳明, 靳慧*, 郑子健, 等.基于机器视觉的施工现场钢结构焊缝坡口识别. 神州娱乐城学报(自然科学版), 2023, 53(01): 86-93.

[14]   Wei Z, Pei X, Qian X, et al. Traction stress-based fatigue failure mode identification of load-carrying welded cruciform joints. International Journal of Fatigue, 2022, 161: 106897.

[15]    Cheng J, Gao Y, Yan H, et al. Statistical analysis of non-destructive testing results of cast steel joints in civil engineering structures. Journal of Southeast University (English Edition), 2022, 38(01): 1-8.

[16]   Wei Z, Pei X, Jin H*. Evaluation of welded cast steel joint fatigue data using structural stress methods. Journal of Constructional Steel Research, 2021, 186: 106895.

[17]   Wei Z, Jin H*, Pei X, et al. A simplified approach to estimate the fatigue life of full-scale welded cast steel thin-walled tubular structures. Thin-Walled Structures, 2021, 160: 107348.

[18]   Wei Z, Jin C, Jin H*.Fatigue life evaluation of girth butt weld within welded cast steel joints based on the extrapolation notch stress method. Journal of Southeast University (English Edition), 2021, 37(01): 59-66.

[19]   Jin H*, Mo J, Sun S, et al. Experimental Study on Medium and Low Cycle Fatigue Properties of Cast Steel GS20Mn5V. Journal of Shanghai Jiaotong University (Science), 2021, 26: 765-773.

[20]   Jiao H, Yan H, Jin H*.Evaluation of mechanical properties of cast steel nodes based on GTN damage model. Journal of Southeast University (English Edition), 2021, 37(04): 401-407.

[21]   Cheng J, Jin H*. An adaptive extreme learning machine based on an active learning method for structural reliability analysis. Journal of the Brazilian Society of Mechanical Sciences & Engineering, 2021, 43: 546.

[22]   Yan H, Jin H*, Yao R. Prediction of the damage and fracture of cast steel containing pores. International Journal of Damage Mechanics, 2020, 29: 166-183.

[23]   闫华东, 宫维佳, 靳慧*. 铸造缺陷对铸钢节点钢结构力学性能的影响. 西南交通大学学报, 2020, 55(02): 343-349+371.

[24]   Wei Z, Jin H*, Chen G. Traction structural stress analysis of fatigue behaviors of girth butt weld within welded cast steel joints. International Journal of Pressure Vessels and Piping, 2020, 179: 104027.

[25]   闫华东, 唐琦, 靳慧*. 考虑含缩孔缺陷的铸钢节点损伤演化分析. 神州娱乐城学报(自然科学版), 2019, 49(05): 904-910.

[26]   闫华东, 靳慧*. G20Mn5N铸钢件微细观孔洞三维特征及形态演化. 金属学报, 2019, 55(03): 341-348.

[27]   Yan H, Jin H*.Damage evolution analysis of cast steel GS-20Mn5V based on modified GTN model. Journal of Southeast University (English Edition), 2018, 34(03): 364-370.

[28]   Xia J, Jin H*. Numerical modeling of coupling thermal–metallurgical transformation phenomena of structural steel in the welding process. Advances in Engineering Software, 2018, 115: 66-74.

[29]   Xia J*, Jin H. Numerical analysis for controlling residual stresses in welding design of dissimilar materials girth joints. International Journal of Precision Engineering and Manufacturing, 2018, 19: 57-66.

[30]   Xia J*, Jin H. Analysis of residual stresses and variation mechanism in dissimilar girth welded joints between tubular structures and steel castings. International Journal of Pressure Vessels and Piping, 2018, 165: 104-113.